PECTINASE 100G
$6.95PECTINOL 100G
FAMILY OWNED SINCE 1992 · AUSTRALIA-WIDE SHIPPING · PHONE 08 9418 8938
Showing 3009–3024 of 4158 results










This is a replacement electrode probe for the Beverage Doctor PH Meter.
We all know that home brewers are pretty tough on PH Meters. Putting your electrode/probe directly into hot wort is quite common amongst home brewers. Doing this can very quicly reduce the life of your probe.
Also the thin glass membrane of a probe can easily be damaged if dropped or mistreated. As a result we would always recommend that home brewers buy a PH meter where you can purchase the replacement probes separately.
This probe type comes with a small piece of sponge in the cap. The sponge has already been saturated with PH storage solution (kCl – 3 mol/L). The storage solution can be purchase separately (Part: KL04183).
Its very important that in order to keep your probe in the best possible condition always keep the end of the probe moist in storage solution. For the same reason we have designed the probe cap with an water tight o-ring seal so it keeps the solution from drying out in the cap. This is an essential part of a good quality PH meter design. If the probe dries out it will also significantly start to reduce the life of the probe and the accuracy of your results.


Need to test some wort or finished beer to check your range? But don’t have a pH Doctor Meter, then get dipping!
Really handy for testing water samples as well, wine anything you need to know if its Acidic or Alkaline.
Reliable and fast indication, just follow the colours on the side of the box to know what pH your test sample is. Please wait around 10-30 seconds for the sample to dry and show an accurate colour.
We also stock a narrow range test kit is specifically chosen for beer brewing with a PH range between 3.8 and 5.4 so you can more accurately determine mash PH.
100 Strip PH 0 – 14 Test Kit

Strip back to basics and grab yourself a narrow range Mash pH test Kit.
Simply dip the strip into your mash and wait 10-30 seconds for the colour to stabilise. Use the colour indicator on the back of the packet to compare the pH reading.
Reliable and cheap

